MIL-DTL-22442/21C(AS)
APPLICABLE DOCUMENTS:
MIL-J-641/22
-
Jacks, Telephone, U-385/U
MS3116
-
Connector, Plug, Electric, Series 1, Solder Type, Straight,
Bayonet Coupling
REQUIREMENTS:
l. The cable shall be in accordance with MIL-DTL-22442/3.
2. Connector "X" shall be MS3ll6Fl0-6P or functional equivalent. Black tubing may be
used as a bushing under strain relief.
3. The weight of the cable assembly shall not be greater than l0 ounces.
4. The stay cord shall be firmly attached to the connectors.
5. The DC resistance shall be less than 2 ohms between the following contacts.
(a) Contact B of "X" and contact 5 of P/N M64l/22-0l (U-385/U).
(b) Contact A of "X" and contact 4 of P/N M64l/22-0l (U-385/U).
(c) Contact C of "X" and contact 3 of P/N M641/22-0l (U-385/U).
(d) Contact E of "X" and contact 2 of P/N M641/22-0l (U-385/U).
(e) Contact D of "X" and contact l of P/N M64l/22-0l (U-385/U).
6. The cable assembly shall be tested in accordance with the tests listed in Table I.
NOTES:
l. All dimensions are in inches.
2. Tolerances are metal parts ±.005, molded sections ±.05 inches unless otherwise
specified.
3. MIL-C-8l863 is superseded by MIL-DTL-22442/2l.
Preparing activity:
Navy - AS
(Project No. 5995-0128-28)
2