MIL-DTL-22442/61B(AS)
REQUIREMENTS
1. The cable (cord) shall be in accordance with M22442/35-3.
2. The weight of the cable assembly shall not be greater than 3 ounces.
3. The staycord shall be firmly attached to the connectors and strain relief.
4. The DC resistance shall be less than 2 ohms between the following contacts:
(a) Contact 1 of P/N M22442/2-2 and contact 2 of U-172/U.
(b) Contact 2 of P/N M22442/2-2 and contact 1 of U-172/U.
(c) Contact 3 of P/N M22442/2-2 and contact 2 of the left earphone contact.
(d) Contact 3 of P/N M22442/2-2 and contact 2 of the right earphone contact.
(e) Contact 8 of P/N M22442/2-2 and contact 1 of the left earphone contact and contact
1 of the right earphone contact.
5. The following parts shall be supplied in a plastic bag with each cable:
(a) One P/N M22442/32-5 nut, tee.
(b) One P/N M22442/32-6 screw, visor housing.
(c) One P/N M22442/32-7 clip. cable.
*6. The strain relief shall be made of 22 GA CRES. ANSI Grade 301 in accordance with
SAE-AMS 5901 and shall be passivated in accordance with MIL-F-14072 E300 or equivalent (as
approved by the qualifying activity).
7. The cable assembly shall be tested in accordance with the tests listed in table I.
NOTES
1. All dimensions are in inches.
2. Tolerances are as follows: Metal parts ±.005, Molded sections ±.05.
3