INCH-POUND
MIL-DTL-18266C
15 January 2014
SUPERSEDING
MIL-DTL-18266B
17 February 2006
DETAIL SPECIFICATION
CORD ASSEMBLY, ELECTRICAL: P/O H-87B/U
Inactive for new design after 22 September 1999.
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers requirements and tests for Cord: P/O H-87B/U. See 6.1 for
information about use with earphone H-87B/U as specified in MIL-DTL-18239.
1.2 Classification. The cords covered by this specification are of one type, designated, Cord:
P/O H-87B/U.
2. APPLICABLE DOCUMENTS
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-228
- Cable and Wire, Insulated; Methods of Testing
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-P-642/3
- Plug, Telephone (Types PJ-054B and PJ-054R) and Accessory Screws
MIL-DTL-10392 - Cord, Electrical (Audio, Miniature)
Comments, suggestions, or questions on this document should be addressed to: DLA Land and
Maritime, Attn: VAI, Post Office Box 3990, Columbus, Ohio 43218-3990 or emailed to
RFConnectors@dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 5995
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business