MIL-DTL-22442/22C(AS)
(b) Contact A of "X" and contact C of "X" with the switch depressed less than
100 ohms.
(c) Contact E of "X" and contact 2 of P/N M641/22-0l (U-385/U) less than 4
ohms.
(d) Contact 3 of P/N M64l/22-0l (U385/U) and contact 5 of P/N M64l/22-0l
(U385/U) less than 10 ohms.
(e) Contact 4 of P/N M64l/22-01 (U385/U) and contact 5 of P/N M64l/22-0l
(U385/U) less than l0 ohms.
8. The cable assembly shall be tested in accordance with the applicable tests listed in
Table I.
9. The DC resistance of the M22442/22-2 cable assembly shall be as indicated when
tested with an ohmmeter.
(a) Contact A of "X" and contact 4 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(b) Contact B of "X" and contact 5 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(c) Contact C of "X" and contact 5 of P/N M64l/22-0l (U-385/U) less than 4
ohms when the switch is depressed.
(d) Contact D of "X" and contact l of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(e) Contact E of "X" and contact 2 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
NOTES:
l. All dimensions are in inches.
2. Tolerances are metal parts ±.005, molded sections ±.05 inches unless otherwise
specified.
3. MIL-C-8l867 is superseded by MIL-DTL-22442/22.
Preparing activity:
Navy - AS
(Project No. 5995-0128-07)
4