MIL-DTL-22442/23C(AS)
APPLICABLE DOCUMENTS:
MIL-C-l0392
-
Cord, Electrical (Audio, Miniature)
MIL-J-64l/22
-
Jacks, Telephone, U-385
MS3116
-
Connector, Plug, Electric, Series 1, Solder Type, Straight, Bayonet
Coupling
REQUIREMENTS:
*1. The cable (cord) shall be in accordance with MIL-C-10392 Type WM-59A/U or
equal.
2. The weight of the cable assembly shall not be greater than 49 ounces.
3. The stay cord shall be firmly attached to the connectors and the switch assembly.
4. The amplifier shall be in accordance with M22442/l-2.
5. The transformer shall be in accordance with M22442/l-3.
6. Connector "X" shall be MS3ll6Fl0-6P or functional equivalent. Black tubing may be
used as a bushing under strain relief.
7. The DC resistance of the M22442/23-l cable assembly shall be as indicated when tested
with an ohmmeter.
(a) Contact A of "X" and contact B of "X" less than 100 ohms.
(b) Contact A of "X" and contact C of "X" with the switch depressed less than
100 ohms.
(c) Contact E of "X" and contact 2 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(d) Contact 5 of M64l/22-0l (U385/U) and contact 4 of P/N M64l/22-0l (U385/U)
less than 10 ohms.
(e) Contact 5 of P/N M64l/22-0l (U385/U) and contact 3 of P/N M64l/22-0l
(U385/U) less than 10 ohms.
(f) Contact 3 of P/N M64l/22-0l (U-385/U) and contact 4 of P/N M64l/22-0l (U-
385/U) less than 4 ohms.
8. The cable assembly shall be tested in accordance with the applicable tests listed in
Table I.
3