MIL-DTL-22442/23C(AS)
9. The DC resistance of the M22442/23-2 cable assembly shall be as indicated when
tested with an ohmmeter.
(a) Contact A of "X" and contact 4 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(b) Contact B of "X" and contact 5 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(c) Contact C of "X" and contact 5 of P/N M64l/22-0l (U-385/U) less than 4
ohms when the switch is depressed.
(d) Contact D of "X" and contact l of P/N M64l/22-0l (U-385/U) less than 4
ohms.
(e) Contact E of "X" and contact 2 of P/N M64l/22-0l (U-385/U) less than 4
ohms.
NOTES:
l. All dimensions are in inches.
2. Tolerances are metal parts ±.005, molded sections ±.05 inches unless otherwise
specified.
3. MIL-C-8l896 is superseded by MIL-DTL-22442/23.
4. Drawing 765AS286 was superseded by MIL-DTL-22442/23.
CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with
asterisks to indicate where changes from the previous issue were made. This was done as a
convenience only and the Government assumes no liability whatsoever for any inaccuracies in
these notations. Bidders and contractors are cautioned to evaluate the requirements of this
document based on the entire content irrespective of the marginal notation and relationship to the
last previous issue.
Preparing activity:
Navy - AS
(Project No. 5995-0128-33)
4