MIL-DTL-22442/4C(AS)
APPLICABLE DOCUMENTS
MIL-J-641
-
Jacks, Telephone, General Specification for
REQUIREMENTS:
*l. M22442/4-l (U-61/U) and M22442/4-2 shall be capable of mating with M22442/5
connectors
2. Sampling and testing procedures shall be in accordance with MIL-J-641.
3. The connector shall pass the following tests when tested in accordance with
MIL-J-641.
a. Visual and mechanical
b. Dielectric strength
c. Contact resistance
d. Insertion and withdrawal force
e. Spring life
f. Salt spray
g. Insulation resistance
h. Moisture resistance
4. The insertion force shall be 8 lb. maximum. The withdrawal force shall be 6 + 2 lb.
5. After the spring life test the withdrawal force shall be greater than 60 percent of the
withdrawal force measured prior to test.
6. The connector insulating materials shall be made of black plastic that shall meet the
requirements of the general specification.
7. Plating of metal parts shall be sufficient to prevent corrosion of the basis metal when
tested in accordance with MIL-J-641.
2