MIL-DTL-22442/32C
FIGURE 7. Contact-electrical cord assembly beveled PIN M22442/32-12.
REQUIREMENTS:
l. The contact shall be brass in accordance with ASTM-B16, Temper H02 or equivalent
(as approved by the qualifying activity).
2. The contact shall be finished 32√ in accordance with ASME-B46.l
3. The contact shall be silver plated in accordance with ASTM-700 Grade B .0003 thick
solderable. Optional plating may be M-262 cadmium plate in accordance with MIL-F-
l4072 or nickel plate.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the fact the only changes were to
update the reference documents.
NOTES:
l. All dimensions are in inches.
2. Tolerances are ±.l5 for two place decimals and ±.005 for three place decimals.
3. Remove all burrs and sharp edges.
Custodians:
Preparing activity:
Army - CR
Navy AS
Navy AS
(Project 5995-0147)
Air Force 11
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the currency of
the information above using the ASSIST Online database at https://assist.daps.dla.mil.
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business