MIL-DTL-3885G
4.3.1.1 Inspection lot. An inspection lot shall consist of cable assemblies covered by the
drawing or procurement document employing the same type and size of connector, the same type
and size of cable, and the same materials and methods of assembly, produced under essentially
the same conditions, and offered for inspection at one time.
4.3.1.2 Unit of product. The unit of product, for purposes of sampling, shall be each
cable assembly as specified in the contract or order (see 6.2).
4.3.1.3 Sample. The sample consists of one or more units of product drawn from a lot,
the units of the sample being selected at random without regard to their quality. The number of
units of product in the sample is the sample size.
4.3.1.4 Specimen. A specimen may be one unit of product or any portion of the unit of
product that is to be subjected to inspection.
4.3.1.5 Rejected lots. If an inspection lot is rejected after group A or group B inspection,
the contractor may withdraw the lot, rework it to correct the defects, or screen out the defective
units, as applicable, and reinspect. Such lots shall be separate from new lots, and shall be clearly
identified as reinspected lots. Resubmitted lots shall be inspected using tightened inspection.
4.3.2 Group A inspection. Group A inspection shall be performed in the order specified
in table V.
TABLE V. Group A inspection.
Requirement
Test method
Test requirement
paragraph
paragraph
Subgroup I
Visual and mechanical (end item)
Visual (solder inspection)
Subgroup II - Electrical
Continuity
Insulation resistance
Dielectric withstanding voltage
Subgroup III - Mechanical
Pull
Pull on connector components
Immersion
4.3.2.1 Major and minor defects. Major and minor defects shall be as defined in table VI
and in the applicable parts of MIL-STD-252. Sampling shall be in accordance with ASQ Z1.4;
the AQL shall be as specified in the contract (see 6.2). This listing should not be construed as
being all-inclusive. Criteria for sample unit major-minor defect rates shall be as specified in the
contract (see 6.2).
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business