MIL-DTL-22442G
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
J-STD-001
-
Requirements for Soldered Electrical and Electronic
Assemblies.
(Copies of this document are available from www.ansi.org or American National Standards
Institute, 11 West 42nd Street, New York, NY 10036.)
ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES
IPC-2221
-
Generic Standard for Printed Board Design.
IPC-2222
-
Sectional Design Standard for Rigid Organic Printed Boards.
(Copies of these documents are available from www.ipc.org or Association Connecting
Electronics Industries, 3000 Lakeside Drive, Bannockburn, IL 60015.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein (except for related
specification sheets, see 3.1), the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and
in accordance with the applicable specification sheet. A global change has been implemented in
regard to cordage jacket materials, to allow the use of polyurethane materials (see 3.4.4). All
other cable requirements as specified in the specification sheets are applicable. In the event of
any conflict between requirements of this document and the specification sheets, except as
specified above, the latter shall govern.
3.2 Part or identifying numbers (PIN). Part numbers for cable assemblies furnished under
this specification shall be constructed as shown in 1.2.
3.3 Qualification. Cable assemblies furnished under this specification shall be products that
are authorized by the qualifying activity for listing on the applicable qualified products list
before contract award (see 4.3 and 6.3).
3.3.1 Qualification of individual components is not required as noted on individual
specifications sheets. However the Government reserves the right to require certification of
compliance of the same. Production items shall be identical in all respects to those submitted to
the Government for approval, unless otherwise approved by the Government in writing.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business