MIL-DTL-22442G
3.3.2 Qualification by similarity. Cable assemblies furnished under this specification may
be qualified by similarity as shown by the examples in MIL-DTL-22442/6.
3.4 Design and construction.
3.4.1 Connectors. The connectors shall be as specified in the detailed specification sheets.
3.4.1.1 Contacts. Contacts used in MIL-DTL-26482 or equivalent type circular connectors
approved by the qualifying activity shall conform to SAE-AS39029. Other contacts shall be as
specified in the specification sheet.
3.4.2 Connections. Connections shall be as specified in the specification sheet.
3.4.3 Terminations. Terminations shall be as specified in the specification sheet.
3.4.4 Cable/cord. Cable/cord shall be as specified in the specification sheet in regard to
cable sizing, configuration, and number of conductors. However, cable/cord jacket and molded
section material made of flame retarding polyurethane may be used in lieu of rubber as specified
by many specification sheets. In regard to the conductor insulation, alternative materials
compatible with the outer jacket material may be used.
3.4.4.1 Molded materials. Molded materials shall be made from similar materials as the
cordage jacketing materials, and shall provide a bond that will meet the requirements of 3.5.5,
3.5.6, 3.5.8, and 3.5.10 with the cable jacket.
3.4.5 Extended length. Extended length of the cable assembly shall be as specified in the
specification sheet.
3.4.6 Weight. The maximum weight of the cable assembly shall be as specified in the
specification sheet.
3.4.7 Switch assemblies. Each switch assembly housing shall be built in accordance with
the specification sheet and may contain a microphone amplifier, microphone keying switch,
earphone impedance matching transformer, and terminal block, or any combination thereof, as
specified in the specification sheet.
3.4.8 Switches. Switches shall be as specified in the specification sheet.
3.4.9 Terminal blocks. Terminal blocks shall be as specified in the specification sheet.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business