MIL-DTL-22442G
3.4.10 Other non-ferrous metals and alloys. The plating or finish used for each individual
part shall provide a good appearance, corrosion and deterioration resistance for that part.
Various problems such as soldering, fitting, assembly, reaction with adjacent parts and the like,
shall be considered in the selection of the plating or finish.
3.4.11 Dissimilar metals. Selection and protection of dissimilar metal combinations shall
be in accordance with MIL-STD-889. The use of dissimilar metals shall be limited to
applications where similar metals cannot be used due to peculiar design requirements.
3.4.12 Interchangeability. Interchangeability shall exist between all units and replaceable
assemblies, subassemblies, and parts for all equipment delivered on the contract using
MIL-HDBK-454, Guideline 7 as guidance. Production items shall be identical in all respects to
those submitted to the Government for approval, unless otherwise approved by the Government
in writing.
3.4.13 Marking. Cable assemblies shall be marked on plastic bands or heat shrinkable
tubing, and shall fit snugly around the cable circumference. More than one identification band
may be used. Heat shrinkable tubing when used shall not be used as support or as a part of the
cable. The cable assemblies shall be marked with the following information:
Example
Information Required
Contract Number
****
Military P/N (Type Designator)
M22442/XX-X (CX-XXXX)
Contractor and Government Entity (CAGE)
****
NSN
NSN 5995-***
3.4.14 Color. The cable shall be black.
3.4.15 Clothing clip. The clothing clip shall be as specified in the specification sheet.
3.4.16 Insulating and impregnating compounds. All insulating and impregnating
compounds including varnishes and waxes, shall meet the requirements for each application as
specified, under all service conditions, including test conditions outlined in section 4 of this
specification. The compound shall preserve the dielectric strength of the insulation to which it is
applied. A compound shall not, either in the state of its original application or as a result of
aging under severe service conditions, show any injurious effect upon the insulation it is
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business